Description
THIS IS NOT A TOY DO NOT LET CHILDREN PLAY WITH THIS SAFE! THIS LISTING IS FOR ONE BRAND NEW 5 5/8 INCH (OUTSIDE DIAMETER) PVC PLASTIC MUSHROOM VENT CAP SAFE MADE WITH A STRONG NEODYMIUM MAGNET MOUNT! THE MAGNET IS SHOWN IN PHOTO 3. THIS VENT CAP IS DARK GRAY IN COLOR. (JEWELRY / MONEY / SCREW DRIVERS / DRILL / COLD AIR DUCT NOT INCLUDED). HAND MADE / CUT- ALTERED / CRAFTED FOR A COVERT LOOK AND FIT. THE OUTSIDE OF THE CAP IS 100% ORIGINAL AND UNALTERED SO JUST BY LOOKING AT THE OUTSIDE OF THIS SECRET CAP SAFE IT CAN NOT BE DETECTED FROM A NORMAL VENT CAP! THE REMOVABLE BACK PLATE IS NOT ORIGINAL TO THE CAP. THE BACK PLATE IS HAND CUT FROM A UNRELATED ITEM AND IS NOT MADE OF PLASTIC OR METAL BUT IS STURDY (HARD) AND THICK. IT IS NOT HAND CUT PERFECTLY ROUND BUT VERY CLOSE. IT DOES NOT NEED TO BE PERFECTLY ROUND. IT WILL HAVE SOME WHITE LETTERING ON ONE SIDE OF THE DISC. SOME OF THESE BACK PLATES MAY BE BLACK OR GREY ON ONE SIDE AND MAY HAVE THE ORIGINAL GOLD PAINT, MAROON OR RED PAINT ON THE INSIDE SIDE OF THE PLATE AS SHOWN IN PHOTO 10.
THIS DARK GRAY VENT CAP IS MADE OF HARD PVC PLASTIC AND IS THICK AND VERY STURDY! ONE OF THE ADVANTAGES OF THIS HIDDEN SAFE OVER OTHER HIDDEN SAFES IS IT CAN BE MOUNTED IN JUST ONE SECOND ON THE METAL BACK OF SOME APPLIANCE ETC AND MOVED TO ANOTHER LOCATION IN SECONDS / MINUTES IF NEEDED. I MOUNTED IT ON A COLD AIR DUCT IN THE FIRST AND SECOND PHOTOS JUST TO SHOW IT MOUNTED. YOU MAY HAVE A BETTER PLACE THAT IS UP HIGH AND OUT OF THE REACH AND OR OUT OF SIGHT OF THE THIEVES THAT YOU CAN MOUNT IT. THIS HIDDEN SAFE CAN AND SHOULD BE MOUNTED ON THE METAL BACK OR BOTTOM OF A WASHING MACHINE, FREEZER, CLOTHES DRYER, FRIDGE, FURNACE ETC OUT OF THE SIGHT OF THE THIEVES! THIS HIDDEN DIVERSION SAFE NEEDS A FLAT IRON OR STEEL MAGNETIC SURFACE TO MOUNT IT TO SO CHECK YOUR ITEM THAT YOU ARE MOUNTING IT TO BEFORE YOU BUY. IF YOU WANT OR NEED TO MOUNT THIS CAP SAFE TO THE SIDE OF A SMOOTH SURFACE I INCLUDED 1 SMALL UNIVERSAL HEAD (CROSS OR FLAT HEAD) SCREW FOR MOUNTING THE CAP ON THE SIDE OF A METAL SURFACE. THE SCREW SHOULD BE SCREWED INTO THE SURFACE SO THE SCREW HEAD WILL STICK OUT AND PREVENT THE CAP FROM SLIDING DOWN. A SMALL SIZE FLAT HEAD OR CROSS HEAD SCREWDRIVER WILL BE NEEDED, AND MAYBE A DRILL, NOT INCLUDED.
THE THE BACK PLATE IS FITTED WITH A NEODYMIUM MAGNET AND PRE ADJUSTED TO FIT ANY FLAT MAGNETIC METAL SURFACE. THIS CAP HAS A LOT OF ROOM INSIDE IT.
FOR MEASUREMENTS KEEP IN MIND THIS ITEM HAS A SLOPE TO IT.
THE OUTSIDE DIAMETER IS APPROXIMATELY 5 5/8 INCHES OR 143 MM. THE OUTSIDE DEPTH IS APPROXIMATELY 3 INCHES OR 76 MM.
THIS MUSHROOM CAP HAS APPROXIMATELY 5 1/8 INCHES OR 131 MM OF INSIDE DIAMETER. IT HAS APPROXIMATELY 2 1/4 INCHES OR 57 MM OF INSIDE DEPTH.
TO MOUNT THIS HIDDEN SAFE TO THE BACK OF A APPLIANCE YOU NEED 3 1/2 INCHES OF SPACE FROM THE BACK OF THE APPLIANCE TO THE WALL. CHECK BEFORE YOU BUY.
THE INSTRUCTIONS OF HOW TO OPEN THIS SAFE IT SCREWS APART. THE BACK PLATE COMES OFF AND IS VERY EASY TO OPEN AND CLOSE. THE 3 SCREWS NEED TO BE UNSCREWED AND THEN THE BACK PLATE WILL COME OPEN. YOU WILL NEED A CROSS HEAD SCREW DRIVER TO OPEN IT. (NOT INCLUDED) IT ALSO HAS A PLASTIC SPLIT RING. THE SPLIT RING SHOULD BE REMOVED FIRST THEN THE SCREWS UNSCREWED LAST. TO CLOSE IT SCREW THE 3 SCREWS IN THEN PLACE THE SPLIT RING UNDER THE SCREWS LIKE IN PHOTO 3. THE SPLIT RING IS HAND CUT AND IS NOT PERFECTLY CUT EVEN. THE SAFE CAN BE USED WITHOUT THE SPLIT RING. (DO NOT OVER BEND THE SPLIT RING).